Extruded anodised aluminium housing

EPDM sealing gasket

Technopolymer anti-glare grid

Toughened, glass diffuser, silk-screened on the inside

Through-wiring designed

IP-rated external socket-plug fast connector (QUICK), complete with factory pre-wired cable

Built-in driver

Stainless steel locking hardware

Recessed box to be ordered separately

High heat-dissipating aluminium gear tray for increased inner components lifespan

Integral unique device for field adjustable beam orientation (0° - 30°)

Stand-alone or seamless linear compositions (up to 80 m) mounting options

Static ON/OFF or dimmable DALI options available

TRIMLESS options available. 

Black painted anodised die-cast aluminium housing

High-transparency polycarbonate optics

Aluminium heat sink

Anti-ageing custom moulded silicone sealing gasket(s) with resilient elastic return capacity

Extra clear, toughened, flat glass diffuser

Die-cast aluminium trim powder-coated

Die-cast aluminium trim, powder-coated, covered with AISI 316 stainless steel (stainless steel options)

Mains connection through waterproof connection system (WATER-STOP)

Stainless steel locking hardware

Technopolymer recess box to be ordered separately

Floor mounted luminaires are usually subject to harsh conditions. For proper use and safety, they must be correctly installed by qualified personnel and according to the manual instructions

Do not install luminaires in sunken areas

Static ON/OFF or dimmable DALI options availale

Black painted anodised die-cast aluminium housing

Aluminium heat sink

High-transparency polycarbonate optics

Anti-ageing custom moulded silicone sealing gasket(s) with resilient elastic return capacity

Extra clear, toughened, flat glass diffuser

Die-cast aluminium trim powder-coated

Die-cast aluminium trim, powder-coated, covered with AISI 316 stainless steel (stainless steel options)

Mains connection through waterproof connection system (WATER-STOP)

Technopolymer recessed box with reinforcing bars for driveability and integral WATER-DRAIN system available as accessory (ordered separately)

Stainless steel locking hardware

Floor mounted luminaires are usually subject to harsh conditions. For proper use and safety, they must be correctly installed by qualified personnel and according to the manual instructions

Do not install luminaires in sunken areas

Black painted anodised die-cast aluminium housing

High-transparency polycarbonate optics

Anti-ageing custom moulded silicone sealing gasket(s) with resilient elastic return capacity

Extra clear, toughened, flat glass diffuser

Extra-clear toughened flat safety glass with acid-etched finish (C/EW versions)

Die-cast aluminium trim powder-coated

Closing ring in AISI 316 stainless steel with satin finish (stainless steel versions)

Mains connection through waterproof connection system (WATER-STOP)

Technopolymer recess box to be ordered separately

Stainless steel locking hardware

Floor mounted luminaires are usually subject to harsh conditions. For proper use and safety, they must be correctly installed by qualified personnel and according to the manual instructions

Do not install luminaires in sunken areas

RGBW and Tunable White versions to be powered with SELV drivers 48V DC, available as accessories to be ordered separately. Colour management through DMX interface

Extruded anodised aluminium housing

IP-67-rated double resin coating - transparent in the lower part to protect the LED from mechanical stresses and to guarantee maximum luminous efficiency - satin finish in the visible part, even in joints proximity, to ensure a homogeneous light distribution over the entire emitting area

Technopolymer external box for electrical connection suitable for Ø 6 - 9 mm rubber cables. This is connected to the appliance with a 25 cm cable. It allows the appliance to be installed and connected without having to open it

External power supply 48V has to be ordered separately

Through-wiring designed

Two-part fitting, consisting of LED luminaire and stainless steel recess box with anti-deformation cover (included). Tool-free installation of the luminaire in the recess box

Recessed box to be ordered separately

RGBW and Tunable White versions to be powered with SELV drivers 48V DC, available as accessories to be ordered separately. Colour management through DMX interface

DMX signal generator for RGBW and Tunable White versions to be ordered separately

Die-cast aluminium housing, polyester powder coat finish ISO 9227/12944 - ISO 9223 (C5)

Toughened flat glass diffuser, internally coated, for homogeneous light distribution

Microprismatic, toughened, flat glass diffuser, silk-screened on the inside (TECH versions)

Satin finish pure aluminium reflector (Al 99.98)

Anti-ageing custom moulded silicone sealing gasket(s)

Built-in driver

Stainless steel locking hardware

Openable and maintainable luminaire (future-proof)

Versions with dimmable 1-10 V or DALI drivers available. 

Die-cast aluminium housing, polyester powder coat finish ISO 9227/12944 - ISO 9223 (C5)

Secured diffuser in printed transparent flat glass

Foam polymer sealing gasket

Stainless steel locking hardware

Built-in driver

Openable and maintainable luminaire (future-proof)

Die-cast aluminium housing, polyester powder coat finish ISO 9227/12944 - ISO 9223 (C5)

Anti-ageing custom moulded silicone sealing gasket(s)

Microprismatic, toughened, flat glass diffuser, silk-screened on the inside (MIMIK FLAT versions)

Single (M) and dual (B) emission versions available

Extra-clear, toughened, flat glass diffuser, silk-screened on the inside (MIMIK models)

MIMIK models are equipped with high-transmittance polycarbonate optics with different light distributions to meet a large variety of lighting schemes

Optimised asymmetric distribution for wide spacing and lighting-class levels matching (CP options)

Built-in driver

Stainless steel locking hardware

EM/1P are maintained emergency versions (1h)

EM/3P version is designed for multipurpose 3 hours sustained emergency lightingOpenable and maintainable luminaire (future-proof)

Die-cast aluminium housing, polyester powder coat finish ISO 9227/12944 - ISO 9223 (C5)

Anti-ageing custom moulded silicone sealing gasket(s)

Built-in driver

Stainless steel locking hardware

Single (M) and dual (B) emission versions available

The MIMIK versions are available with asymmetric (CP) or circular (C/I) optic options. In the dual emission versions (B), the two different beam types are combined.

Optimised asymmetric distribution for wide spacing and lighting-class levels matching (CP options)

Openable and maintainable luminaire (future-proof)

Efficacy – 140lm/W.

Optics: Open Area Lens or Asymmetric.

IP65 and IK10 resistant housing.

Rear or side cable entry points as standard.

Suitable for conduit and BESA box installations.

Integrated options: Photocell or Microwave sensor available

Available in range colour temperatures.

Fixed Output as standard Multiple Control

Options available on request